How To Build A Horse Fence Cheap? (Best solution)

What is the best fence for a horse?

  • Brace against tension. When you have a curvy fenceline,and then you tighten up the lines on it,the tension is not even.
  • Escape routes. Since we couldn’t fully tension up the lines,our lines were looser than recommended – which the horses quickly discovered.
  • Perfectly straight fencelines.
  • When a tree falls….

What is the cheapest horse fencing?

Electric wire or rope fencing is one of the cheapest horse fence materials, and it’s also the easiest to install and remove. The cost for this type of fence is related to the type and number of strands used and the choice of energizer.

How much does it cost to build a horse fence?

Horse Fencing Prices Horse fencing averages between $2,075 and $2,230, including labor and materials. The total costs to install a fence can be as little as $1,675 or as much as $2,500, depending on the type of fence chosen. High-tensile wire fencing is the least expensive option at $3.50 to $8 per foot.

How tall does a horse fence need to be?

Horse fences should be 54 to 60 inches above ground level. A good rule for paddocks and pastures is to have the top of the fence at wither height to ensure that horses will not flip over the fence. Larger horses, stallions, or those adept at jumping may require even taller fences.

What is the cheapest fence to build?

PVC fencing. The cheapest way to create a fence for your home is by getting one made from PVC. Such fences substitute wooden pickets and stakes to offer your protection from the outside world. PVC sleeves improve the stability of wooden posts used as a fence, reducing the cost of material and the labor used.

How many acres does a horse need?

In general, professionals recommend two acres for the first horse and an additional acre for each additional horse (e.g., five acres for four horses). And, of course, more land is always better depending on the foraging quality of your particular property (70% vegetative cover is recommended).

What can I use for horse fence?

The kinds of fences commonly used for horses include rail (plank or PVC), various forms of galvanized and vinyl coated wire, electric and combinations of these. Whatever the fence is made of, it needs to be highly visible, resistant to damage by horses, durable, attractive and safe for contact by horses.

How many feet of fence do I need for 5 acres?

How Many Feet Of Fence For 5 Acres? For a 5 acre lot of any shape, you will need a total length of 1866.8 feet of fence. If you have a perfectly square-shaped yard then each side will be 1866.8 / 4 = 466.7 feet.

How many feet of fencing do I need for an acre?

You would need slightly under 836 linear feet of fencing to completely enclose a square 1 acre lot. This is assuming that you would be fencing each side in using straight lines. A perfectly square 1 acre lot would cover 43,560 ft² of space.

What kind of wood is used for horse fencing?

The planks used for horse fencing are typically oak, poplar or pine. Oak has a rustic look and can be tough to come by. But it’s a hard, durable wood, and horses don’t always like its taste. Green oak may warp, though, so be sure it’s fully cured.

How deep should horse fence posts be?

Line Post Holes – should be approximately 24-36” deep. End/Corner Posts Holes – should be 36-48” deep depending on frost line. Fill the hole with concrete to approximately 4” below ground level. Make sure that the bottom of the hole​ is at least 6” wider than the top of the hole.

Do horses need electric fence?

Easy to See – Because of the structure of horses’ heads, their depth perception is somewhat limited. This makes it difficult for them to see a single strand of metal conductor line. Recognizing the presence of an electric fence is necessary for the animal to associate the correction with the fence.

Is barbed wire fencing OK for horses?

Barbed wire should not be used for horses, and electric fencing alone is not recommended for perimeter fences. However, because horses are sensitive to electric shock, they can be easily trained to respect electric fences. A major concern is visibility.

Is it cheaper to buy or build a fence?

2. Is it cheaper to build your own fence? Yes, you will usually save money building your own fence than hiring a contractor for the same project. But keep in mind that either way, the actual cost depends on the material and style of fence you choose — and how much work you want to do yourself.

What is the easiest fence to install?

The quickest and easiest fence to install is with wood panels. The wood panels are not always the cheapest, but they save time rather than installing the rails and pickets separately.

How to Build a Horse Fence in Six Easy Steps

Horse fence is required if you have horses on your property and are responsible for their maintenance. You do not, however, need to be a rocket scientist in order to construct a basic fence to keep your horse contained. A wooden board fence or a post and rail fence are the most frequent types of fencing used to keep horses in their enclosures. Besides wire mesh fencing, other alternatives include vinyl fences, electric horse tape fences, and a mix of the aforementioned. The posts are the most fundamental and frequent structural part of any horse fence, regardless of the style of fence you choose to build.

Materials Needed:

  • Treated wooden posts 8 to 9 feet (2.4-2.8m)
  • sTreated wooden boards cut to 6 to 8 feet (1.8-2.4m) lengths
  • Nails (or screws)
  • Post hole digger (or shovel)
  • Spirit level
  • Hammer or nail gun (or drill with screwdriver bit if using screws)
  • sGravel
  • sStakes and string
  • A measuring wheel and/or a tape measure are required. Fast setting cement or concrete (optional)


  • Strips of hoop-iron
  • A pole or poles (wider than the gate opening)
  • And other materials.


To determine how much material you will require, first measure the area that you wish to fence with a measuring tape or measuring wheel to determine how much you will require. Determine how high you want your fence to be and how many boards you want across each section before you begin construction. You should keep in mind that your fence must be tall enough to contain your largest horse or your most accomplished jumper, with the bottom board placed low enough to prevent a small pony or miniature horse from slipping under, and the spacing between boards should be small enough to prevent a horse from getting its head through.

Make a decision on how far apart you want the fence posts to be spaced.

If you want a genuinely sturdy, robust fence that will bear the weight of horses resting on it, the spacing between posts should never be more than 8 feet (2.4 meters) apart for horse fencing.

Step 2

Mark the location of your end posts, and then thread twine or builder’s string tight between them at the height of the top of each post to determine the height of your fence. Measure the distance between posts with a board that has been cut to the appropriate size, then stake off the area as needed. Keep in mind that if you want the boards from either side of the post to meet in the middle of the post, you’ll need to leave enough room for the board from the next section of fence to be fastened next to the current board on the same post before you start building.

If the boards are longer than the spaces in the fence, this is a very easy option to use since it eliminates the need to trim them to fit the gaps.

Planting the Posts

To dig the holes for the posts, you can use a post hole digger or a shovel. A minimum depth of 3-foot should be achieved in heavy clay soil, or 4-foot if the poles are to be put in light sandy soil, with an additional 6-inch allowance for the gravel foundation (see below).

Step 4

Begin with the end posts and work your way down to the base of each hole with a 6-inch layer of gravel. This allows water to drain away from the post and keeps it from rusting away. After that, insert the post into the hole at the center of the hole. In the same manner, begin planting the inline posts, making sure that each post is straight and that the top of each post is in line with the string that has been stretched between the end posts, so that it will be level with the end posts and that the height of your fence will be consistent.

If it is too low, you may fill up the gap with a little more dirt or gravel; if it is too high, you will need to dig the hole a bit deeper until it is level.

To make a stronger post, fill up the hole with quick-setting cement or concrete and allow it to cure. Alternative: If you’re planting posts in very loose sandy soil, this is highly suggested for you.


Once all of the poles have been planted in the ground, you may begin to nail or screw the cross planks into place. Make use of a tape measure to ensure that the boards are spaced properly. To attach the boards, lightly tack or screw them in place, making sure that they are straight using a spirit level before hammering the nails in or screwing the screws in entirely. If you make a mistake, it is far easier to remove a plank that has been very lightly fastened to the post than it is to remove one that has been firmly fastened to the post.

Alternatively, the posts and boards can be replaced with an interlocking post and rail system if you prefer a different type of fencing material.

Step 6

Leaving a gap in your fence where you want the entrance to be is a very simple and straightforward technique of adding a gate to your fencing project. Make a D-shaped loop out of strips of metal hoop-iron by bending them to fit the diameter of your pole and nailing them to the post at the top and bottom of the hoop-iron. You’ll need to nail one to each of the gate’s posts on each side of the gate’s opening. To open and shut the gate, all you have to do is slip a pole through the hoops, which is all that is required.

Please keep in mind that certain horses may rapidly find out how to slip the poles out, therefore some type of attachment may be required.

The knowledge that you have constructed a solid paddock fence that will keep him safely contained on your land will allow you to introduce him to his new surroundings with confidence.

Cheap Horse Fence Ideas

Horse housing may be a costly endeavor, especially when it comes to the installation of fencing around the animals. A horse fence that is solid enough to keep the animal without causing injury to the animal or inflicting damage to the fence when a horse rushes into it can take a significant bite out of your bank account’s balance. Although it is never a good idea to cut corners on horse safety in order to save money, there are some less expensive options available.

Electric Wire or Rope Fencing

In addition to being one of the most affordable horse fence materials, electric wire or rope fencing also happens to be one of the simplest to install and remove. The cost of this sort of fence is determined by the type and quantity of strands that are utilized, as well as the energizer that is employed. Solar-powered fencing, for example, requires no maintenance because it is fueled entirely by the sun’s rays.

Electric fence can be either temporary or permanent, but for permanent installations, high-tensile wire is the ideal choice. Look for a fence with contrasting colors to ensure that it stands out visually to horses and does not cause them to dash into the fence or become trapped.

High-Tensile Polymer Fences

A high-tensile polymer fence has the appearance of a rail fence, but it is really built of vinyl plastic panels that are 4 to 6 inches wide and include two or three high-tensile steel wires that are wrapped around the panels. Wires are maintained under tension by posts that are set 16 to 90 feet apart from one another. These fences are also fairly robust, have excellent visibility, and are available in a variety of designs, allowing you to find one that matches your personal preference. They are also simple to clean, according to Home Depot, if your horse enjoys playing in the dirt or kicking it around.

Horse Fence Ideas: Rubber Fences

Rubber fence is made from recycled tires and conveyor belts, making it both ecologically beneficial and cost-effective to install. Not only are such fences inexpensive, but they are also simple to erect and soft and yielding, making them safer for horses to cross. One disadvantage of rubber fences is that they have a propensity to stretch and droop with time, especially in hot weather. Make sure to avoid rubber fence that includes nylon threads since horses that chew on them might suffer from colic as a result.

Horse Fence Wire

The diamond mesh or square knot mesh type of woven wire fence, which is highly recommended by Tractor Supply Co., is 2 inches wide by 4 inches high and has a weave of 2 inches wide by 4 inches high. For rust prevention, wire fencing is frequently coated with zinc, which is referred to as galvanizing. This can add a minor amount to the overall cost of the fence. Despite the fact that it is affordable, avoid using barbed wire since it is possibly injurious to horses.

See also:  Why Do Horse Flies Bite? (Solved)

Horse Fence Design Using Wood

Despite the fact that wood beam fence is a costly alternative, it is also relatively low-maintenance and long-lasting, making it a more cost-effective solution in the long run. Board fences are available in a variety of thicknesses, with 1-inch-by-6-inch treated boards being the most affordable sort of timber fence. By using recycled fencing or lumber, purchasing fencing in big lot sizes, and erecting the fence yourself, you may save money on the cost of fencing.

How to Build a Horse Fence–From Design to Construction

Whether your stable is part of a professional boarding or training facility, or it’s on your own property, a horse fence is an essential component. These fences provide your horses with a safe area to gallop and graze, preventing them from going away and keeping them safe from predators and other dangers. Your horse fence, on the other hand, will only be effective if it is correctly designed and constructed. What is the best way to go about it? From beginning to end, we’ll teach you all you need to know about constructing a horse fence from scratch.

How to Design Your Fence

Once you have made the decision to install a horse fence on your property, you must first sit down and determine what style of fence you want. So, do you want a post and rail fence or a wire fence, for example? If you decide on wire fencing, will it be powered by electricity? Take some time to think about the answers to these questions before moving on to the next step: Draw a map of your property lines. It is common practice to begin the design process for a horse fence with a piece of paper and pencil, as is the case with other design tasks.

  • Analyze your land and determine the exact location where you intend to install your fence.
  • Make a Plan for Your Environment Once you’ve determined where your fence will be located, it’s time to evaluate the surrounding environment.
  • Is there a slope that you’ll need to consider while making your plans?
  • Make a note of all of these details so that you can acquire the necessary equipment for a successful installation.
  • The chances of this happening are higher if you live in a densely populated area—even if you’re only installing a fence on your own property.

However, even though most horse fence is just 5 feet high, it’s a good idea to double-check with your local government before starting the construction process. Additionally, property owners should contact their local underground utility to get any hidden lines marked.

Steps for Building Your Wire Fence

You’ve drawn out your plan, walked the property, and worked with the city to get approval for the project. now what? Construction of a horse fence is actually a rather straightforward process—all it requires is some basic knowledge and a lot of elbow grease! Simply follow the instructions outlined below: Assemble Your Resources The first thing you need do before beginning to build a horse fence (or any other job, for that matter) is to ensure that you have the appropriate equipment available.

  • Fencing
  • Fence stretcher
  • Wire splicer
  • Post hole digger
  • Concrete, spade, tamper, hammer, chain saw
  • Rule or steel tape
  • Other tools 200 feet of string (at the very least)
  • Wearing protective equipment (such as goggles, gloves, etc.)

Prepare Your Posts Once you’ve gathered your materials, walk out to your pasture to begin erecting the fence posts you’ve purchased. If there is any greenery in the way of your fence line, use the chainsaw to clear it away completely. Then, using your post hole digger (either a hydraulic or a manual digger will work), dig a hole large enough to accommodate the post. The corner posts and bracing are the most critical components of any fence you build, since they serve as the structure’s basis.

  1. In order to ensure that your post lies 24-36 inches below the ground (while still standing 60 inches above the ground), you need strengthen it with concrete first.
  2. To keep your fence line straight, you can tie a string around it (simply attach it to the previous post and pull it taut to get a straight line).
  3. Once your final post is securely in place, you may proceed to the following phase, which is the installation of the fence.
  4. Unroll the fencing so that it spans the whole length of your fence, and then use your fence stretcher to draw the wires taut between each post, taking care not to overstretch them in the process.
  5. If you want to make your fence more apparent to the horses, you can also add a board made of wood or PVC pipe along the top.
  6. Wire fencing is quite heavy, and you will need at least one additional person to assist you in unrolling the fence without injuring yourself.

Should You Build the Fence Yourself or Hire an Installer?

We understand what you’re thinking: “Is it really worth it all?” A horse fence is obviously very crucial for the protection of your horses, so make sure you have one installed. Is it truly necessary for you to do it yourself? Without a doubt, this is not the case. The installation of this system may be handled by experienced installers. Hiring a professional crew may save you time and effort—and it’s likely that their fence will stand up better against the weather if you’re not used to doing things on your own.

Whether you hire a professional or construct your own fence, the most essential thing to remember is that the end product must be both safe and secure for your animals.

He works as the Director of Marketing and Client Services for Red Brand, a line of premium agricultural fencing materials that is widely considered as the most well-known brand of agricultural fence in the United States. Dain Rakestraw has been with the company for over a decade.

How to Build a Horse Fence (Step-by-Step Guide + Tips)

Horse fences should be thoroughly planned and designed before construction can commence. The benefit of installing a horse fence is that it provides assurance that your horses will be protected from unwanted visitors. In addition, a well-constructed horse fence enhances the aesthetics of a horse residence. There are some considerations to make when constructing the horse fence. The purpose of a fence is to keep your horses secure from harm. However, if you are running a business, you must examine the value and attractiveness of your product or service.

  • That does not imply that you will proceed with the construction of a horse fence without taking the cost into consideration.
  • Horse fences are available in a variety of styles.
  • You may pick from a variety of materials for your basic fence including rail, galvanized and vinyl coated wire, wood, and electric, or you can mix several of these materials.
  • Now, let’s take a look at how this project should be carried out, from preparation to planning to construction to set-up and every element associated with horse fence.


In order to build a building, you must first plan and have a clear vision of how and where you want it to be constructed. You can use the following considerations to assist you in making your decision:

The Ideal Gate

Image courtesy of cdodt and Pixabay When designing a horse fence, keep in mind that different types of fences will be installed for a variety of reasons. Our fences will be used for a variety of purposes, such as enclosing pastures, riding areas, exercise paddocks, and property lines. The appearance, efficacy, and method of installation will all be influenced by the geography of your property. Paddock layouts must be designed specifically to facilitate the movement of pastures, the production of hay, and the grazing of livestock.

  1. It is necessary to take into account the different types of horse groupings.
  2. Because they are not cared for in the same way as other animals, they will have a separate type of fencing installed around them.
  3. Don’t leave any gaps or spaces since the horses might get their feet or heads caught in them.
  4. The barrier will remain in place for a long period if a well-thought-out plan is implemented.

In addition, there will be a reduction in the amount of time required to work at the horse farm. That will make it easier for those who are employed to work efficiently and successfully with the least amount of effort.

How to Choose Posts

Image courtesy of neilbude and Pixabay. The most important components of a horse fence are the posts. They are the most visible members of the team, thus they should be carefully chosen. However, if we want our fence to survive for a long time, this is a procedure that must be carried out properly. As a result, while constructing the horse fence, driven posts are preferred over other types of posts. This is due to the fact that they do not require concrete or the drilling of holes. Ideally, wood posts should be used, albeit they should be treated because they are susceptible to termites and ants.

Such positions, on the other hand, are long-lasting, providing you with service for more than 20 years.

Other forms of fences, on the other hand, will require you to measure a significant distance between the posts.

Gate Design and Location

A good gate should be well-designed, sturdy, and visually appealing. It is not necessary for the gate to match the horse fence in appearance. Wood posts and metal tubes are required for the construction of a gate. Other building materials, such as fasters, braces, and other similar items, can be considered. Gates, like the horse fence, should be built to a high standard. As previously said, horses may attempt to jump over the fence, which may result in an accident. Install gates that open and close with a swinging motion to allow horses to pass more freely.

Avoid building at intersections because horses can become entangled in the construction.

Image courtesy of AlkeMade and Pixabay.


Let’s take a look at some of the procedures that you may take to construct a basic horse fence and gate. The fence is composed of wood, and it is one of the most straightforward buildings that you may build on your own.

Things to Consider

Before putting the plan into action and ordering the supplies, you should take the following factors into consideration:

  • The style of fence you want to build
  • The size of the fence
  • What was the height of the fence? the enclosure’s four corners
  • The location of the barrier in relation to the number of lanes and roads that are available
  • The materials that will be utilized

Materials Needed

  • Lumber for the posts and boards that is 8-9 feet in length (treated)
  • Lumber for the boards that is 6-8 feet in length (treated)
  • Nails, shovel, spirit level, stakes and strings, hammer, tape measure, cement, gravel

Steps to Follow When Making a Horse Fence

Image courtesy of StockSnap and Pixabay.

1.Take Measurements

The first step is to take accurate measurements of the space. Measure the area where you wish to put your fence with the help of your tape measure. Keep in mind that the fence height is important since it must be able to fit all horses, regardless of their size, in the back of your mind. The space between the posts should be kept to a bare minimum to avoid horses from becoming entangled. It may be pricey in the short term, but it will be effective in the long run. The distance between the posts should be at least 2 m, and the height of the posts should be 1.5 m at the most.

Then, using twine, measure the height of the post in order to decide what height you should choose.

A board cut can then be used to measure the distance between each of the posts after this has been completed.

You can arrange the boards in a different way on either side of the center to guarantee that they meet in the center.

To achieve good outcomes, alternate the boards on a regular basis. The advantage of using this approach is that you don’t have to trim the longboards down to their proper length. Related Article: Which Of These Horse Fencing Types Is The Most Effective? (ProsCons)

2.Installing the Posts

A shovel will be required for the installation of your post. The kind of soil to be used determines the size of the holes that must be excavated. If the soil is clay, the hole should be 3 feet deep; if the soil is sandy, the hole should be 4 feet deep. Because of the gravel footing, you need allow 6 inches between the holes. You are now free to begin putting up your posts. Consider adding a six-inch layer of gravel at the bottom of each hole. The purpose of doing so is to keep the post from decaying since the water will drain properly.

  • Continue reading the rest of the post while following the same method as you did before.
  • To do this, use the string and make certain that it is properly stretched from the first to the last pole.
  • If you have any that are very high, you should dig the hole even deeper.
  • You have the option of putting some bricks around the sides of the hole.
  • Once all of the poles are securely in place, it is time to start adding dirt.
  • It is possible to make your posts studier by mixing in cement or concrete.


Image Credit: Rene Schaubhut, Pixabay This is the last step of installing your horse fence. Now that all the posts are installed, the next thing to do is to nail. Take your harmer and start nailing the cross boards. To get the correct measurements on spacing in between the boards, you can use a tape measure. When you start nailing, you can use aspirit levelto determine whether the boards are on a straight line. If you are satisfied, then continue nailing till you are through. The nailing should be tight enough to avoid doing a shoddy job.

See also:  What Is The Fastest Breed Of Horse? (Perfect answer)

Steps to Follow When Making a Gate

Making a horse gate is simple if you follow the procedures outlined below.

Materials Needed for a Wooden Gate

Two poles that have been treated are required. They should be 2.4 meters in length and 1.6 meters above the ground to be effective. If your horses are tall, you may raise the length and height of the fence to 3.7 meters long and 2.4 meters above ground.

2.Dig the Holes

Image courtesy of claritynd and Pixabay. Two holes should be dug for your treated gate poles. This means that they must be placed on the area that was left after you finished constructing the barrier. Plant your poles first, and then pour the concrete around them. Please make certain that you have enough to make the poles more sturdy.

3.Build Your Wooden Gate

Image courtesy of stux and Pixabay. The horizontal bars and vertical beams that make up your wooden gate should be spaced evenly apart. Of course, the quantity you choose should be influenced by the overall appearance you desire for your gate. However, in a normal circumstance, six horizontal bars and two vertical beams are the most appropriate configuration. The height of your horse’s gate should be high enough to reach the horse’s neckline.

However, if you discover that your horses enjoy jumping about, you may raise the gate taller to accommodate them. In addition, the nails and screws should be properly fastened in order to prevent the horses from tearing through the gate.

4.Attach Your Gate

Take the gate that you’ve created and put it to the post using the screws you’ve provided. Make use of door hinges and drill the screws through them to provide the structure a solid foundation. Continue to the other post and check to see that they are properly fitted. The ideal gate should be able to open and close both ways.

5.Attach a Rope

At this point, you may add a latch or a rope to the gate to make opening and shutting it more convenient. If you are concerned that your horse will be able to open the gate, you can use a chain. However, if the rope or lock is correctly attached, there is no reason to be concerned.

Tips for Maintaining a Horse Fence

Because of the high cost of wood, constructing a horse fence is not a cheap endeavor. This need regular maintenance in order to prevent incurring further repair expenditures. Here are some suggestions for routine maintenance:

  • Horses enjoy chewing on wood because they find it to be delicious. Replace your wood as soon as you see that it has been chewed to avoid this situation. As a result, they will be less likely to eat them further. Nails that have popped out should be screwed back in. Extra nails can also be used to increase the stability of the structure. It is not always necessary to wait until the nails have dropped before replacing them. To keep ants and termites away from the wood, coat it with paint. Choose to paint every two years or whenever you see that they are starting to fade. When it comes to mending your horse fence, avoid using outdated materials. They are already worn out and will not be able to withstand much more use. They will, on the other hand, provide you more employment by mending things on a regular basis.

Final Thoughts

The process of constructing a horse fence is not complicated. You are not required to use wood for the fence; instead, you can use other materials. We’ve spoken about how to make a horse fence out of wood, and we’ve gone over all of the stages you need to do to get good results. Meanwhile, the key to building a long-lasting horse fence is to take the necessary precautions. Avoid using outdated materials for construction, and while anchoring the posts to the ground, be sure to tighten the nails.

Featured Image courtesy of David Wagner and Pixabay.

Building A Farm Horse Fence

If you’re thinking about adding horses to your farm’s ever-growing list of animals, you’ve undoubtedly learned that constructing a fence for your farm horses is not an easy process. There are so many different types of fences to select from that it can be tough to choose which one would be best for your horses. Here are some pointers and suggestions to assist you through the process of constructing the greatest farm horse fence possible, which will keep your horses contained and happy while also keeping them safe.

What To Think About When Fencing Horses

Many factors must be taken into consideration when constructing a horse fence; thus, before you begin, you should ask yourself the following questions:

  1. What kind of pasture do you require? If you simply have one or two horses, a small paddock may be sufficient
  2. However, the more the number of horses you have, the more fence you will want. How much will it set you back? Depending on the size of your paddock, you may be able to afford more expensive and visually appealing fencing such as wooden board fences
  3. But, if you’re intending to create a bigger paddock, less expensive solutions such as electric fencing may be a better option. What height do you think the fence should be? Generally speaking, for an average-sized horse, a fence height of 5 feet or slightly less is a good general guideline, but you may change it according to the size of your horses. If you’re maintaining small horses, for example, a tall fence made for Clydesdales will be more than adequate
  4. However, if you’re keeping miniature horses, a tall fence designed for Clydesdales will be more than adequate.

Good Fences For Horses

Photograph by James Raynard/Flickr Although there are many different types of fencing available, there are a few that are preferable when it comes to a farm horse fence. Some of the greatest fence designs are as follows:

  • It’s difficult to beat the beauty and presence of a wooden board fence, which conjures memories of lush fields and galloping Thoroughbreds deep in the heart of Kentucky’s horse country. Fences made of wood board work well for farm horses since they’re durable and visible (there’s practically no way a horse can miss a board fence!). However, they’re significantly more expensive than other choices and don’t last as long. Fences made of electric wire are safer, easier to install, and less expensive than the alternatives when it comes to horse fence construction. It will need some more resources to construct a four- or five-wire electric fence, such as a charger and grounding rods, but they are regarded to be among the safest solutions for horse fences, and you can construct lengthy fences without incurring a significant financial burden. Ensure that you are using polymer-coated wires or wires that have been weaved into polymer tape or rope. Plastic board fences are similar in appearance to wooden board fences, but they are less costly and require less care than their wooden counterparts. However, they are not as strong as their wooden counterparts. Mesh Wire: Mesh wire, which has small square- or diamond-shaped gaps, may be used to construct superb horse fence. Mesh wire fences are a good compromise between electric and board fences in terms of cost because they are typically safe and require little maintenance.

Bad Fences For Horses

However, while any of the types of fencing indicated above are suitable for enclosing farm horses, there are a few types of fencing that should not be used because of potential safety concerns.

  • In the case of a farm horse fence, barbed wire is regarded to be a no-no due to the possibility that horses would rush into or become entangled in the fence, causing themselves to be injured by the sharp barbs. Even though mesh wire, as previously mentioned, can be used to construct a good horse fence, it’s important to ensure that the openings in the mesh are not too large
  • If a horse is able to slip its hoof through the openings, there is a risk that the hoof will become stuck, resulting in injury to the horse. When using any mesh wire, be certain that the spaces between the wires are tiny enough to avoid the possibility of horses getting their hooves caught in the fence. Uncoated Smooth Wire: A cousin of barbed wire, smooth wire is frequently used in high-tensile fences comparable to electric fences. However, unless a brightly-colored coating is added, smooth wire can be difficult for horses to detect, making it a less-than-safe alternative for usage around horses. For further information on fence kinds and visibility, see the Natural Resources Conservation Service website of the United States Department of Agriculture.

Materials Needed For Building A Horse Fence

Photograph courtesy of Steven Martin/Flickr The specific materials that you will require to construct a farm horse fence may vary based on the style of fence that you select.


Unless you’re utilizing trees to support your fence (which is not suggested) or pursuing the odd path of erecting gigantic stone fences, you’ll need posts to hold your fence up. Posts are often composed of wood, steel, plastic, or fiberglass. They can also be built of other materials.

Despite the fact that wooden posts can decay over time and require insulation from electric fences, they are a fantastic alternative when strength is necessary. Even in fences that utilize steel or fiberglass posts for the line posts, hardwood corners are frequently employed to reinforce the fence.


The specific kind you’ll need varies depend on the style of fence you choose to create, but you’ll need the right fasteners to attach the fencing material to the posts in the first place. Nails or screws can be used to secure wooden board fences; staples can be used to secure mesh wire fences. Additional insulation will be required for electric fences to prevent wires from coming into contact with wooden or steel posts, where the electric current can travel down the post and interfere with the proper flow of electricity, as well as to prevent wires from coming into contact with each other.


A variety of designs, sizes, and materials are available for gate construction, with steel tube gates being the most robust and widely used. Make certain that the gate you pick is large enough to accommodate not just horses but also machinery. After constructing your fence, you won’t want to learn after it has been completed that your gate is not large enough to accommodate machinery (for example, to mow the lawn).

Electric Fence Charger and Grounding Rods

A reliable low-impedance charger with adequate power to charge the whole length of your electric fence will be required if you have one installed; make sure to measure the length of the fence you’ll be installing and get a charger that is rated for that length of fence. In order to complete the electric circuit, many metal grounding rods, each measuring 6 feet in length, will be required.

How To Install A Farm Horse Fence

Despite the fact that the specifics of creating a horse fence might vary widely, there are a few fundamental stages you can follow to assist you construct the ideal fence.

Step 1

Making a reconnaissance run for pasture land is a wise first step. Measure the whole length of the fence to ensure that you acquire the necessary quantity of supplies, such as posts and fencing materials, for the project. This is also the best time to decide where the fence gate will be installed, if any (s).

Step 2

Following the creation of the pasture’s layout, the following step is the installation of the posts. Make sure to pay special attention to the corner posts of high-tensile and electric wire fences since they will be supporting the weight of the wires that have been tightly wound. Post holes can be excavated using manual tools, but a post hole drilling machine may dramatically speed up the operation significantly.

Step 3

After the posts are in the ground and you have completed the installation of the actual fence (whether it is board, electric, mesh wire, or something else), your pasture should be ready to use. Consider spending some time with your horses to carefully introduce them to the new pasture; it’s a good idea to walk them around the perimeter and familiarize them with the boundaries when installing any new fence. Horse fence construction will take time and work, but by researching your options and making educated selections, you will be well on your way to creating a fence that is ideal for your farm horses.


Building a wooden horse fence is a great way to keep cattle contained while also providing a rural home a barn-country appearance. For generations, people have been erecting wooden fences to denote their land boundaries and keep their animals contained. They are simple to maintain and more durable than certain other types of fences. Their natural look also serves as an excellent means of blending your fence with the surrounding scenery.

A simple three-rail horse fence is constructed using components such as 4-by-4-inch wood posts and 1 1/2-by-4-inch, 8-foot-long rails, as well as other common materials. When it comes to coming up to a horse’s chest area, fences are typically 4 feet high.


The construction of these fences begins with the drilling of post holes with shovels and post diggers. This is frequently the most taxing part of the job to perform. The holes must be bored at least 12 inches into the earth in order for the 5-foot posts to become 4-foot posts once the dirt has settled around them. A suitable distance between the posts is determined, which is normally approximately 8 feet, and the three rows of rails are then nailed to the inside of the posts to complete the structure.

See also:  How Long Can A Horse Lay Down? (Correct answer)

Galvanized nails are recommended because they are more resistant against rust.


Unlike wood fence, which eventually succumbs to the weather and must be repaired from time to time, vinyl fencing is often covered by a lifetime guarantee from the manufacturer when it is installed. Termites and rot might be attracted to wood. Fences made of wood will endure longer if they are painted, as the paint seals in the wood and protects it from moisture. Wood fences are less expensive to construct, and while they may not last a lifetime, they are more natural than synthetic materials, and you will never have to worry about your fence becoming a source of litter in a landfill down the road.

Best Horse Fencing Options

Archaeologists discovered a 5,600-year-old village site in Kazakhstan and discovered that its Copper Age residents were among the earliest societies to tame horses. They made this discovery while examining the site. What is the evidence? Corral posts have been buried beneath the ground. Fences have, without a doubt, been essential to our shared connection from the beginning. Wood fence is extremely visible and durable, but it may be expensive, which is a drawback to this option. The use of traditional and contemporary materials to enclose our horses is far superior than that of ancient riders, who were confined to wood and stones as a means of protecting their mounts.

Each fence selection entails striking a balance between safety issues and aesthetics, cost, and care.

Selecting your fences with care will help you optimize the safety, value, charm, and usability of your property. Let’s start with a discussion on safe fence construction before moving on to the vast array of options.

Horse Fence Safety

A barbed wire fence and flaming firearms were used to tame America’s Wild West. When handled poorly, both are still lethal weapons. In large pastures with thick-skinned, docile cattle, barbed wire is typically safe; however, the usage of barbed wire on horse estates has resulted in several catastrophes. If you have any on your horse land, the first thing you should do is remove it off the property. Building laws may ultimately dictate the fence requirements for your property, but there are certain general rules of thumb that apply almost everywhere.

  • To be on the safe side, set your fences at a 5-foot minimum height where they border roads or anyplace a stray horse would be able to exit your property.
  • At the bottom of the fence, an opening of 8 to 12 inches will keep feet and legs from becoming stuck, as well as prevent foals from rolling under the fence and becoming entangled.
  • The majority of wire fences, including fabric and high-tensile smooth wire, require triangular-shaped bracing at the corners and at intervals of around 1/8 mile in order to sustain tension.
  • The need of visibility, particularly when using wire fence, is all too often disregarded.
  • Make wire fences more visible by adding a top rail made of wood, PVC, or durable white vinyl fence ribbon in either the regular or electrified configuration.
  • What matters most is that the horses see just a smooth side of the fence, regardless of the material or design used to construct it.
  • Furthermore, a horse that rushes along the fence line may be injured by the exposed fence posts.
  • Corners may also be problematic, particularly if you want to graze horses who do not get along well with one another.
  • When the corner angle is sharp, the situation becomes even more difficult (90 degrees or less).
  • Wire fence barriers must be installed on the outside of the posts to accomplish this, although it is less of an issue around corners than it is along straight runs of fences.
  • Do you require fencing materials?

Here are a few of our favorites. Fencing Made of Wire The products that we present have been hand-picked by our editorial staff. PolytapeT-Posts If you make a purchase after clicking on one of the affiliate links, we may receive a commission. (For further information, please see this link.)


The strength and integrity of a fence are derived from high-quality fence posts that have been correctly erected. As a result of the necessity for strain in wire fences, the corner assemblies and gate assemblies must be braced to prevent them from being pulled apart. In general, when utilizing wood posts, it is preferable to utilize concrete to install corner assemblies and gate posts rather than wood screws. Wood corner and gate components, as well as metal T-posts, provide further strength to the structure.

  1. When it comes to creating an effective and safe pen, it is common to employ a variety of fence choices.
  2. When building a plank fence or just utilizing wood posts, the type of wood you choose will depend on the availability of the wood in your area and your own preferences.
  3. Common softwoods that are resistant to rot and insect infestation, such as cedar, redwood, and cypress, can be used to inhibit decomposition by acting as a decomposition barrier.
  4. Therefore, riders frequently pick pressure-treated timber (typically pinewood or fir), which costs 1/3 to 1/5 of the price of the previously listed kinds.
  5. Make sure you utilize treated wooden posts that have been approved for in-ground installation.
  6. A competent fence constructor may be able to drive round wooden posts into the ground, which is a technique that packs the posts more firmly than excavating and back filling the earth.
  7. If you are building the fence yourself, you should consider having a contractor put the posts in this manner if it is practical.
  8. The use of timber posts in conjunction with wire materials is popular with riders who want to reduce the overall cost of their fences.

Metal T-posts

Despite the fact that they are inexpensive to acquire and labor-saving to install, the majority of people would agree that they are not visually appealing. Unfortunately, the majority of horsemen do not put their funds to use in order to make their horses as secure as possible. If you do decide to use metal T-posts, make sure you cover them with plastic mushroom-shaped covers to reduce the likelihood of a horse becoming impaled. Better still, get caps that will allow you to attach an electric mesh ribbon, which will boost visibility while prohibiting horses from putting their heads over to munch on the grass.

A horse’s grazing and socializing outside of the fence line frequently results in damage to wire fencing, which can bend fence posts when horses push against the wires or mesh.


Barriers are the most important aspect of a fence; posts are only there to keep the barriers in place. Ultimately, if a horse has his mind set on escape, he will be able to overcome practically every obstacle. If you want to keep a horse contained, you need build a fence that is sturdy enough to withstand the animal charging at it while also acting as a psychological barrier to prevent the horse from attempting to flee.

Wood board fence

In our discussion of posts, we’ve previously touched on the subject of wood. Wood board fences are highly regarded for their beauty, great visibility, and overall robustness, among other qualities. Horse chewing, weathering, and other factors result in a high initial cost ($4 to $5 per linear foot for a typical, unpainted four-rail fence) and a high level of upkeep as a result of these factors. Horses can break through if they are scared, and nails and splintering can be a concern in this situation.

PVC board fence

Many riders choose these fences because they offer the aesthetic charm of a painted-wood fence without the hassles of upkeep and maintenance. However, the price might be too expensive. The cost per linear foot is around $10. Even while internally ribbed PVC boards are engineered to withstand breaking, they are also designed to break apart when pressure is applied? For a 1,000-pound animal, this is hardly the most effective barrier. It is advised that an electrical wire system be installed to ensure that horses remain respectful of and contained within the PVC enclosure.

Pipe steel

Pipe steel is an extraordinarily robust and long-lasting material for fence construction. These fences, on the other hand, have no give, and a horse might incur injury if it collides with one. Fortunately, because of great visibility, such situations are kept to a minimum. Even in the Oil Patch, where pipe can be inexpensive and abundant, transportation and labor expenses may be prohibitively expensive, and you may be forced to engage a professional installation to cut and weld the pipes. Once the fence is constructed, it will be difficult and expensive to make changes because of the nature of the material.

High-tensile wire

The phrase “high-tensile wire” simply refers to wires that have been subjected to a lot of stress. A variety of wire textiles, smooth wire fences, and the vast majority of electric-fence designs fall under this category. The most distinguishing feature of all of these is that the fence is drawn taut, much like a tuned instrument string (though not nearly as tight). In order to offset the pulling forces of the fence material, posts, corner assemblies, and braces are strategically positioned at various intervals along the fence line.

It may be necessary to use springs or tighteners on fences in order to keep them correctly tensioned when the weather changes or as a result of age and stretching.

Fence textiles frequently contain kinks in them, which function as springs to resist the expansion and contraction of metal as a result of temperature fluctuations.

Smooth wire

Smooth-wire designs are the least expensive to construct when compared to other types of fences. They’re essentially barbed-wire fences that don’t have any barbs. The inexpensive cost of some designs is made possible by the use of poles spaced as far as 20 feet apart. It is possible to find hundreds of various designs in use, with wire counts varying from three to eight. In general, the smaller the confinement area, the greater the number of wires required. Because visibility is an issue, producers have created wire wrapped in PVC coating in a range of colors to address the problem.

Smooth-wire fences are typically used in conjunction with electrical systems to generate a deterrent effect, as horses quickly learn that a smooth-wire fence is not dangerous to push against when approached from behind.

Woven field fence

Field fence made of woven wire is utilized in a broad range of livestock applications and is commonly accessible and affordable, especially when used in conjunction with metal T-posts and other accessories. Among its most significant advantages are its low cost per foot, along with its ability to properly house animals while keeping out wildlife. Take note of the term weaved. There are low-cost fence textiles that are brazed or spot-welded together, but they are prone to breaking and failing when subjected to the demands of horses, and are therefore unsuitable for equestrian use.

Openings should be no more than 3 inches square in size, in most cases.

With the addition of a top board or the use of electrified fence tape, visibility can be increased.


V-mesh is one of the safest fence materials because it is made up of horizontal and diagonal wires that are woven into a cloth to form a “V” or diamond pattern. This wire fencing can absorb the force of a galloping horse while also providing an almost impenetrable barrier against varmints, wild predators, and wandering dogs, among other things. These characteristics make it a popular choice for use in foaling operations and tiny paddock enclosures. The most significant disadvantage is the expense (about $4 per linear foot, which is nearly the same as that of a standard wood fence).

Electric fencing

A good barrier works on two levels: it creates a physical barrier that prevents horses from escaping, and it creates a psychological barrier that causes horses to believe that escaping is either too difficult or impossible. Even though we don’t think of psychological deterrents very often, they are a fundamental concept of electric-fence systems. Once a horse has been shocked, it learns very quickly not to touch the barrier. Chargers that deliver high-voltage, low-ampere current are used in conjunction with conductive wire materials to transmit the current, as well as ground rods that are buried in the ground to complete a circuit.

There must be no obstructions to the current flow at any point in the circuit in order for the system to function effectively.

For these and other reasons, fence installers (whether they are professionals or homeowners) must be meticulous in their adherence to installation specifications and rules.

It is necessary to repair the damage in order to restore operation.

A deterrent to horses pushing, climbing, chewing, or otherwise testing a fence, most horse owners combine electric fence systems with conventional fences, such as wood, PVC plastic, wire mesh, or high-tensile smooth wire, to provide a deterrent and prevent horses from pushing, climbing, chewing, or otherwise testing a fence.

Electric-fence systems are simple upgrades that may improve the efficacy and lifespan of your pasture fence. They cost around 15 cents per linear foot and can be installed in minutes.

Leave a Reply

Your email address will not be published.